As an Amazon Associate, RackReveal earns from qualifying purchases. Some links on this page are affiliate links, at no extra cost to you.
A travel trailer tongue bike rack carries your bikes on the A-frame at the front of the trailer, so the rear stays clear. There are two main types: carriers that mount over the tongue jack, and bike bunks that add a raised 2 in receiver for an RV-approved hitch rack. Below are four options that were in stock on Amazon US when we checked; specs come from each listing and the makers’ pages, and we haven’t tested them hands-on.
Quick answer: for a simple two-bike setup on the tongue jack, look at the Let’s Go Aero Jack-It Double (80 lb listed). For more bikes or cargo later, the Jack-IT PRO has accessory ports (40 lb per bike). If you’d rather use a hitch bike rack, a bike bunk bolts to the A-frame and gives you a receiver for one; the Stromberg Carlson CC-275 adds a raised 2 in receiver for RV-approved racks such as the Swagman Traveller XC2. Keep the rack plus bikes within the bunk’s limit.
Two Ways to Carry Bikes on a Trailer Tongue
| Tongue jack carrier | Bike bunk + hitch rack | |
|---|---|---|
| How it mounts | Over the A-frame tongue jack | Bolts to the A-frame and adds a receiver (2 in on the Stromberg Carlson CC-275) |
| Bike rack | Built in | A hitch bike rack bought separately; check which racks the bunk’s maker approves |
| Example | Let’s Go Aero Jack-It Double, Jack-IT PRO | Stromberg Carlson CC-275 or KUAFU bunk + an RV-approved rack such as the Swagman Traveller XC2 |
| Watch for | Jack and coupler fit; per-bike weight limit | Rack weight counts toward the bunk limit; propane tank access |
Before You Buy: Weight and Clearance
- Check two limits. A jack carrier lists its own limit, sometimes per bike (the Jack-IT PRO lists 40 lb per bike, and the carrier itself weighs 45 lb). A bike bunk’s limit can include the separate rack: Stromberg Carlson says its CC-275 supports 100 lb for the bike rack and bikes together. For example, the Swagman XC2 lists 39 lb, which leaves about 61 lb for both bikes on that bunk, with neither bike over the XC2’s 35 lb per-bike limit.
- Tongue weight. The bunk or carrier, the rack and the bikes all change how the trailer is loaded. Check the loaded trailer’s tongue weight against the range and limits for your trailer, hitch and tow vehicle, wherever you mount the bikes.
- E-bikes. Stromberg Carlson says its bike bunk is not approved for e-bikes or motorbikes, whatever they weigh. Use a carrier whose maker explicitly approves e-bikes, and stay within its per-bike, total and size limits.
- Turning clearance. Stromberg Carlson says turning radius and rack position decide whether a bunk works. Measure, then check clearance as described below.
- Fit. Check your A-frame width and rail height, your tongue jack and coupler, and your propane tank covers against each listing.
4 Travel Trailer Tongue Bike Rack Options
| Product | Type | Listed capacity | Notes (per listing) |
|---|---|---|---|
| Let’s Go Aero Jack-It Double | Tongue jack carrier | 80 lb | Foam bumpers, SwayControl; NoMotion pins can be padlocked |
| Let’s Go Aero Jack-IT PRO | Tongue jack carrier | 40 lb per bike | Three accessory ports; locks and cable included; needs a coupler with a structural bottom plate |
| KUAFU Trailer Tongue Bike Bunk | A-frame bike bunk | 100 lb | A-frames 14 to 55 in wide, rail up to 6 in high; no drilling |
| Swagman Traveller XC2 | RV-approved hitch rack | 35 lb per bike, 2 bikes | 2 in Class 3 receiver; 39 lb item weight; bumper adapter included |
As listed on Amazon at the time of writing. Listings change, so check the product page before you buy.
Let’s Go Aero Jack-It Double Bike Carrier
A two-bike carrier that mounts over the tongue jack and attaches to the A-frame. The listing says carrying bikes at the front of the trailer puts them where there is the least bounce and frees the rear for cargo, and that foam bumpers and a SwayControl system protect the bike finish, with NoMotion pins that minimize wobble and can be padlocked. The spec table lists an 80 lb load capacity and a 36.4 lb item weight.
Best for: two regular bikes with no extra receiver to set up. Skip it if: you carry e-bikes or more than two bikes.
- VERSATILITY – The Jack-It mounts over the tongue jack and attaches directly to you A-Frame trailer.Fit Type: Universal F…
- MORE SPACE – Frees up space for additional cargo on the rear of the trailer where bikes are typically stored
- ENHANCED STABILITY – The Jack-It allows you to carry your bikes on the front of your trailer, where there is the least b…
Let’s Go Aero Jack-IT PRO Two Bike Carrier
A heavier-duty Jack-IT that installs over the three-bolt pattern of most electric or manual A-frame tongue jacks, with three receiver ports for add-ons sold separately (more bikes, storage, a table or a spin tray). The listing says it needs a coupler with a structural bottom plate, carries two bikes rated up to 40 lb each with 22 in or larger wheels and tires up to 2.75 in, and includes two common-keyed locks and a cable. It weighs 45 lb.
Best for: starting with two bikes and adding more bikes or gear later. Skip it if: your bikes have smaller wheels or wider tires than listed. It had only 4 ratings when we checked.
- Extra Heavy-Duty PowerTower A-Frame Mount: Designed to withstand the toughest conditions and added cargo loads, the Jack…
- Expandable Bike and Cargo Capability: The Jack-IT PRO offers expandability options with accessories including the Four-I…
- TwinSpin Bike Accessibility: Featuring access points on both the V-Wing and the Stinger that each rotate 360 degrees for…
KUAFU Trailer Tongue Bike Bunk
A steel, powder-coated bunk that bolts to the A-frame without drilling and holds a bike rack. The listing doesn’t state the receiver size or which racks it approves, so confirm those with the seller before you buy a rack for it. It says it fits most A-frames 14 to 55 in wide with the rail up to 6 in high, lists a 100 lb capacity, and covers what to do if the brake box or propane tank covers get in the way, or if tow-vehicle clearance is tight (mount the rack toward the RV). The spec table gives an item weight of 20.46 kg (about 45 lb).
Best for: using a hitch bike rack on the tongue, once the seller confirms receiver size and rack fit. Skip it if: you want a single all-in-one carrier. It had 28 ratings when we checked.
- Compatibility-Compatible with most A‑frame trailers (14″–55″ wide, rod ≤6″ high) and propane tanks. If the emergency bra…
- Premium Material-High‑grade steel with black powder coating – rustproof, weatherproof, and durable for long‑term use
- Multi‑function-Primarily mounted to the A‑frame of your RV/trailer/camper, it holds bikes securely and, in addition, pro…
Swagman Traveller XC2 RV Bike Rack (for a Bike Bunk)
An RV-approved two-bike platform rack for a 2 in Class 3 receiver, which also mounts to a 4.5 in continuous steel welded RV bumper adapter and comes with a 2 in bumper adapter. The listing gives 35 lb per bike and a 39 lb item weight, and the upright bar folds down when not in use. On a bunk, add the rack’s weight to your bikes and stay within the bunk’s limit, and confirm the bunk’s maker approves the rack.
Best for: two light bikes on a 2 in bike bunk receiver such as the CC-275’s. Skip it if: your bikes plus this rack would exceed your bunk’s limit.
- RV APPROVED: The TRAVELER XC2 works well with various sizes of trailers & campers
- EASY TO ASSEMBLE: Only takes a few minutes to assemble following the instructions.
- CONVENIENT: Once installed, simply load your bikes and you are ready to go! When not in use you can fold the upright bar…
As an Amazon Associate, we earn from qualifying purchases at no extra cost to you.
The Stromberg Carlson CC-275 bike bunk is another option, but it was low in stock on Amazon when we checked. Carrying bikes on a pickup instead? See our truck bike carriers and hitch bike racks.
How to Install a Tongue Bike Rack
- Measure first. A-frame width and rail height, the tongue jack and coupler, propane tanks and covers, and the gap to the tow vehicle.
- Follow the instructions. Mount the carrier or bunk exactly as the maker says, and tighten all hardware to spec.
- Weigh the load. Check each bike against the rack’s per-bike limit, the rack plus bikes against the bunk’s limit if you use one, and the loaded trailer’s tongue weight against your limits.
- Load and secure. Strap each bike as the rack’s instructions say, and lock it if you’ll leave the trailer.
- Check the turn clearance. With a helper watching, turn slowly in small steps in both directions and stop well before anything gets close. Leave extra room for bumps and uneven ground.
- Recheck on the road. Stop after a short distance and check that everything is still tight.
Black Friday Tip and Gift Idea
Black Friday tip: if you plan to buy a tongue bike rack on Black Friday 2026 (November 27) or Cyber Monday (November 30), measure your A-frame, tongue jack and tow-vehicle clearance and weigh your bikes now, then shortlist racks whose limits and fit match. Check the current price on Amazon on the day rather than a “was” price.
Gift idea: a tongue bike rack is a useful gift for a camper who rides, but only if it fits their trailer. If you’re not sure, a gift card is the safer choice.
FAQ
Can you put a bike rack on a travel trailer tongue?
Yes, on most A-frame trailers, in one of two ways: a carrier that mounts over the tongue jack, like the Let’s Go Aero Jack-It, or a bike bunk that bolts to the A-frame and gives you a receiver for a hitch bike rack (the Stromberg Carlson CC-275 adds a raised 2 in receiver for RV-approved racks). Check the fit dimensions, the weight limits and the turning clearance to your tow vehicle first.
How much weight can a trailer tongue bike rack hold?
It depends on the rack. The Jack-It Double lists an 80 lb load capacity and the Jack-IT PRO 40 lb per bike. Stromberg Carlson says its CC-275 bike bunk supports 100 lb for the bike rack and bikes together, and the KUAFU bunk lists 100 lb. Check each bike against the per-bike limit, include the rack’s weight where the bunk’s limit covers it, and check the loaded trailer’s tongue weight against your trailer, hitch and tow vehicle limits.
Can I carry e-bikes on my trailer tongue?
Only on a carrier whose maker approves e-bikes. Stromberg Carlson says its CC-275 bike bunk is not approved for e-bikes, and the Jack-IT PRO lists 40 lb per bike. Let’s Go Aero makes a separate Jack-E carrier for two e-bikes up to 80 lb each. Check the e-bike’s weight and size against the carrier’s limits.
Will a tongue bike rack hit my tow vehicle when I turn?
It can. Stromberg Carlson says the turning radius and rack position decide whether its bunk works for you, and KUAFU says to mount its rack toward the RV if clearance with the tow vehicle is too tight. Measure from the bikes to the back of the tow vehicle, then check clearance slowly with a helper, stopping well before contact.
What about my propane tanks?
Bike bunks sit above A-frame propane tanks. Stromberg Carlson and KUAFU both suggest a soft vinyl cover or a flip-top hard cover so you can reach the valves or refill the tanks; with some covers you have to detach the crossbar.
Is a tongue bike rack better than a rear bumper rack?
A tongue carrier keeps bikes at the front of the trailer: Let’s Go Aero says that is where there is the least bounce, and it keeps the rear free for other cargo. A rear rack needs a hitch or bumper mount approved for it, and it changes the trailer’s balance too. Either way, check the loaded tongue weight and follow the trailer maker’s and rack maker’s guidance.
🛠️ Buying Gear for Your Work Truck?
A free Amazon Business account gets you bulk pricing, tax-exempt purchases, and business-only deals on tools, racks, and truck accessories.
Create Free Amazon Business AccountAs an Amazon Associate we earn from qualifying purchases.
