As an Amazon Associate, RackReveal earns from qualifying purchases. Some links on this page are affiliate links, at no extra cost to you.
The right bike mount for your truck bed depends on two things: your bike’s front axle and your truck bed’s setup. This guide explains the main types of truck bed bike mounts (quick-release fork mounts, thru-axle fork mounts, wheel-on mounts and bed-width racks), what to check before you buy, how to secure the bike, and six mounts that were in stock on Amazon US when we checked. We haven’t tested them hands-on; the details come from each Amazon listing.
Quick answer: quick-release (9 x 100 mm) bike and willing to remove the front wheel: Delta Cycle fork mount (lockable). Thru-axle bike: a fork mount with thru-axle adapters. Keep the front wheel on: INNO RT201 or JOYTUTUS (standard beds) or INNO RT202 (beds with track systems). Two bikes in a full-size bed: the Pipeline 2-bike rack.
Types of Truck Bed Bike Mounts
- Quick-release fork mounts. A small block that bolts to the bed floor, a board or a bar. You take off the front wheel and clamp the fork to it. Most fit 9 x 100 mm quick-release forks.
- Thru-axle fork mounts. The same idea for bikes with 12 or 15 mm thru-axles, usually with adapters for different axle sizes.
- Wheel-on mounts. Mounts that let you carry the bike without removing the front wheel. Designs and installation vary, so follow each rack’s instructions.
- Bed-width multi-bike racks. A wheel-on rack that sits across the bed and holds two or more bikes.
Another option is a tailgate pad, which hangs bikes over the tailgate; see our tailgate bike pads guide.
Before You Buy: Check Your Bike and Your Bed
Your Bike’s Front Axle
A quick-release wheel has a thin skewer with a lever, and the fork has open slots for a 9 mm axle. A thru-axle is a thick axle through closed holes in the fork, usually 12 x 100, 15 x 100 or 15 x 110 mm (Boost). The size is often printed on the axle or listed in the bike’s specs. Match both the axle diameter and the width. The Delta mount below is for 9 x 100 mm quick-release forks only; for a thru-axle fork, use a mount that lists your exact axle size.
Your Truck Bed
- Track systems. Some trucks have C-channel or deck rail tracks along the bed sides. The JOYTUTUS listing names the Tacoma, Tundra, Maverick, Gladiator and Cybertruck as trucks with tracks it doesn’t fit.
- Covers and accessories. Tonneau covers, bed rails, bed racks and roll bars can block rail-clamp mounts.
- Bed width. Bed-width racks need a minimum width; the Pipeline 2-bike rack lists 58.5 in.
Truck Bed Bike Mount Comparison
| Mount | Type | Bikes | Front wheel | Install (per listing) |
|---|---|---|---|---|
| Delta Cycle | Quick-release fork mount | 1 | Removed | Bolts to a flat surface |
| MUQZI thru-axle fork mount | Fork mount with adapters | 1 | Removed | Bolts down; check bolt size |
| INNO RT201 | Wheel-on | 1 | On | No tools, no drilling |
| INNO RT202 | Wheel-on, upright | 1 | On | Clamp-on, no drilling |
| JOYTUTUS | Wheel-on | 1 | On | Clamps to bed side rails, no drilling |
| Pipeline Racks | Bed-width wheel rack | 2 | On | No drilling; bed at least 58.5 in wide |
As listed on Amazon at the time of writing. Listings change, so check the product page before you buy.
6 Truck Bed Bike Mounts by Type
Delta Cycle Truck Bed Bike Mount (Quick-Release Fork Mount)
A steel fork mount for standard 9 x 100 mm quick-release forks. The listing says it mounts to any flat surface, has a cam lever, can be locked with a padlock, and comes with a lifetime warranty. It holds road, mountain and hybrid bikes with 9 x 100 mm dropouts.
Best for: a simple, lockable mount for quick-release bikes. Skip it if: your bike has a thru-axle, or you don’t want to drill or build a base for it.
- Optimum Transportation for Your Bike: Safely and securely transport or store your bike with Delta’s Truck Bed Bike Mount…
- Keep Your Bike Secure: Built-to-last sturdy steel body offers a 9mm quick release skewer to quickly access any bike with…
- Easy to Assemble: Our patented cam lever design allows you to quickly install and lock your bike with any padlock for ad…
MUQZI Thru-Axle Bike Fork Mount (with Adapters)
An aluminum fork mount with a quick-release bar and four pairs of adapters. The listing says it fits 12 x 100, 15 x 100 and 15 x 110 mm thru-axles and 9 x 100 mm quick-release forks, and can be mounted in a truck bed, van, trailer or on a roof rack. It comes with two types of mounting screws and T-nuts; the listing says to check that the bolt size suits your truck or rack.
Best for: thru-axle bikes, or a household with both axle types. Skip it if: you want to keep the front wheel on.
- 2023 Upgraded Bike Fork Mount: The upgraded fork holder has a heightened design that allows the quick release bar lever …
- Truck Bed Fork Mount: Made of aluminum alloy, with upgraded CNC process, our bike thru axle fork mount is high quality a…
- What You Get: Come with 1 x Upgraded Bike Block Fork Mount, 1 x Quick Release Bar, 4 x Pairs of Upgraded Adapters, 3 x F…
INNO RT201 Velo Gripper (Wheel-On, Standard Beds)
A one-bike mount for carrying the bike without removing the front wheel; the listing describes a ratcheting fork holder. The title says it’s for standard pickup trucks, but one listing bullet mentions C-channel track systems, so check fit for your truck with INNO. The listing says no tools and no drilling are needed, it has a D-ring for tie-down straps, and it works with a standard bike cable lock (not included).
Best for: one bike in a standard bed with the wheel on. Skip it if: you need to carry several bikes.
- [Velo Gripper]Put your bike in the bed of your truck without sacrificing precious cargo space with our Velo Gripper bike…
- [System]C-Channel Track Systems
- [Capacity]1 bike capacity. Standard truck beds
INNO RT202 (Wheel-On, Beds With Track Systems)
The title says this INNO mount is for pickups with C-channel track systems. It holds the bike upright on the inside of the bed; the listing claims that frees up 90% of the bed, though usable space depends on your truck and bike. The listing describes clamp-on installation with included hardware and no drilling, and D-rings on each clamp for a cable lock. Confirm with INNO that it fits your truck’s track.
Best for: trucks with C-channel bed tracks. Skip it if: your bed has no track system; check the RT201 instead.
- SPACE-SAVING – Mount your bike in the upright position on the inside of your truck bed, freeing up 90% of your truck bed…
- ALL TYPES – This carrier is adjustable and can hold a bike of any shape or size. Works with–Standard Bike Cable Locks (N…
- D-RINGS – Each clamp has built-in D-rings that provide tie-down points for a cable lock with or without the bike mounted…
JOYTUTUS Truck Bed Bike Rack (Wheel-On, No Drilling)
A telescopic steel tube that clamps to the bed side rails, with a front-wheel clamp and a hook-and-loop strap. The listing says no drilling or tire removal is needed. It lists fit for standard beds without track systems, naming the F-150/F-250/F-350, Ranger, Silverado, Colorado, Sierra, Canyon and Ram 1500/2500/3500, and says it doesn’t work with track systems, tonneau covers, bed rails, bed racks or roll bars.
Best for: an open, standard bed with no accessories. Skip it if: you have a tonneau cover, bed rails or a track system.
- Wide compatibility & important note: Universally fits standard truck beds without track systems, including F150/F250/F35…
- Anti-Wobble & Anti-Rollover System – Our truck bed bike rack uses the lock clamp system to hold the bicycle to prevent w…
- Studry and Durable – The mount has a strengthened 15mm telescopic tube, is not easily worn, and is not easily bent. Dura…
Pipeline Racks 2-Bike Truck Bed Rack (Full-Size Beds)
An all-aluminum wheel-mount rack that sits across the bed and holds two bikes with the front wheels on. The listing says it fits beds at least 58.5 in wide, takes 20 to 29 in wheels with 0.75 to 2.8 in tires (3 to 5 in fat tires need the optional fat-tire kit), installs without drilling, and comes in 3, 4 and 5-bike versions. It lists mountain, road, cruiser, e-bike, fat-tire and BMX bikes, but its details give a 40 lb load capacity without saying whether that’s per bike or total, so confirm with Pipeline before carrying heavy bikes such as e-bikes.
Best for: two riders with a full-size truck. Skip it if: your bed is narrower than 58.5 in, or you carry heavy e-bikes and can’t confirm the load rating.
- PICKUP TRUCK BED MOUNT – This bike rack is designed to fit pickup truck beds with a minimum width of 58.5″, providing a …
- VERSATILE BIKE TRANSPORT – You can easily transport a wide variety of bikes, including mountain bikes, road bikes, cruis…
- NO HASSLE INSTALLATION – The wheel-mount design eliminates the need to remove the front tire, making installation quick …
As an Amazon Associate, we earn from qualifying purchases at no extra cost to you.
How to Mount and Secure a Bike in a Truck Bed
- Pick the spot. Choose a position the rack’s instructions allow, with clearance for the handlebars, other cargo and the tailgate.
- Fork mounts: fix them properly. Use the hardware and method the mount’s maker specifies, on a solid base that is itself fixed to the truck; a loose board is just cargo. If you drill the bed, check what’s underneath first, such as the fuel tank, fuel lines, brake lines and wiring.
- Wheel-on mounts: install and check. Install the rack exactly as its instructions say, then push and pull it to make sure it can’t shift.
- Stop the bike swinging. Use the restraint points and strap method the rack and bike makers recommend, don’t overtighten straps on the frame, and check the bike doesn’t touch the bed sides.
- Lock it. Use the mount’s lock point or a cable lock through the frame.
- Recheck after a few miles. Clamps, bolts and straps can loosen; check them again after the first stretch of driving.
Black Friday Tip and Gift Idea
Black Friday tip: if you plan to buy a truck bed bike mount on Black Friday 2026 (November 27) or Cyber Monday (November 30), check your bike’s front axle, your bed width and whether you have a track system, cover or bed rails now, then shortlist mounts that list your setup. Check the current price on Amazon on the day rather than a “was” price.
Gift idea: a fork mount is a small, useful gift for a cyclist with a pickup, but only if it matches their axle. Check whether their bike uses a quick-release or a thru-axle first.
FAQ
What is the best way to mount a bike in a truck bed?
It depends on your bike and truck. A compatible fork mount, installed as its maker says, secures the bike with the front wheel removed. A wheel-on mount keeps the front wheel on and usually installs without drilling. Whichever you use, follow the rack’s instructions for restraining the bike so it can’t swing.
Do I have to take the front wheel off?
With a fork mount, yes: the fork clamps to the mount where the wheel’s axle would go. Wheel-on mounts, like the INNO RT201, JOYTUTUS and Pipeline racks on this page, hold the bike with the front wheel on.
How do I know if my bike has a quick-release or a thru-axle?
A quick-release front wheel has a thin skewer with a lever, and the fork has open slots (dropouts) for a 9 mm axle. A thru-axle is a thick axle that threads through closed holes in the fork, usually 12 or 15 mm. The size is often printed on the axle or listed in the fork or bike specs. Buy a fork mount that lists both your axle diameter and its width (for example 9 x 100 mm or 15 x 110 mm).
Do truck bed bike mounts require drilling?
Fork mounts usually bolt down, so they need a solid base that is itself fixed to the truck, using the hardware and method the mount’s maker specifies. The INNO, JOYTUTUS and Pipeline racks on this page are listed as no-drill. If you drill, check what’s under the bed first, such as the fuel tank, fuel lines, brake lines and wiring.
Will a truck bed bike rack work with a tonneau cover?
Not always. The JOYTUTUS listing says it doesn’t work with C-channel or deck rail track systems, tonneau covers, bed rails, bed racks or roll bars. Check the listing for your bed setup, and remember that a closed cover limits how tall a bike can stand.
Can I lock my bike in a truck bed mount?
Some mounts have a lock point. The Delta Cycle fork mount can be locked with a padlock. The INNO RT202 has D-rings on its clamps for a cable lock; the RT201 lists a D-ring for tie-down straps and says it works with a standard bike cable lock (not included). A lock slows down a thief but doesn’t make an open truck bed secure, so don’t leave bikes there unattended for long.
More bike-hauling guides: best truck bed bike racks, bike holders for truck beds, heavy-duty pickup bike racks and tailgate bike pads.
🛠️ Buying Gear for Your Work Truck?
A free Amazon Business account gets you bulk pricing, tax-exempt purchases, and business-only deals on tools, racks, and truck accessories.
Create Free Amazon Business AccountAs an Amazon Associate we earn from qualifying purchases.
