As an Amazon Associate, RackReveal earns from qualifying purchases. Some links on this page are affiliate links, at no extra cost to you.
Last updated: September 2026
Truck bed slides are sliding cargo trays that roll out past the tailgate, so you can reach tools and gear without climbing into the bed. The right one depends on three numbers: the width between your wheel wells, your bed length, and how much weight you’ll carry. This guide compares Bedslide, CargoGlide, VEVOR and MORryde truck bed slides by size, capacity and extension.
How we chose: this comparison uses the size, capacity and extension figures stated in each Amazon listing title. We haven’t hands-on tested these slides. Measure your bed before ordering, because a slide that’s even an inch too wide won’t drop between the wheel wells.
Quick Comparison: Truck Bed Slides by Size and Capacity
| Listing | Size (L x W, per listing) | Capacity (per listing) | Best for |
|---|---|---|---|
| Bedslide Classic 10-5841-CLS | 58″ x 41″ | 1,000 lb | Narrower (often mid-size) beds |
| Bedslide 1000 Classic | 65″ x 48″ | 1,000 lb | Full-size short beds |
| Bedslide Classic 10-7348-CL | 73″ x 48″ | 1,000 lb | Longer full-size beds |
| Bedslide Contractor 15-6848-CGB | 68″ x 48″ | 1,500 lb | Heavier work loads |
| Bedslide 2000 | 78″ x 48″ | 2,000 lb | Long beds, heaviest loads |
| CargoGlide 1500 (75% extension) | 63″ x 48″ | 1,500 lb | Full-size short beds |
| CargoGlide CG1000XL-7041 | See listing | 1,000 lb | Full reach (100% extension) |
| VEVOR sliding organizer | 65″ x 48″ | 1,000 lb | Budget full-size option |
| MORryde CTG60-2060W | 60″ x 20″ | See listing | A narrow tray beside other gear |
How to Size a Truck Bed Slide
- Width between the wheel wells. This is the number that rules everything. Many full-size beds are around 48-50″ between the wells, and many mid-size beds are narrower. Measure yours at the narrowest point.
- Bed floor length with the tailgate closed. The slide has to be shorter than this, with room left for the tailgate to shut.
- Extension. A 75% slide rolls out three-quarters of its length. A 100% slide comes all the way out, so you can reach the front of the tray from the tailgate.
- Height. A slide raises your load floor. If you run a tonneau cover or a camper shell, check that your tallest gear still clears it.
Want drawers instead of a sliding tray? See our truck bed drawer system guide. For other storage ideas, see best truck bed storage solutions.
Bedslide Truck Bed Slides
Bedslide is one of the best-known names in truck bed slides, and its listings state the size and capacity right in the title. The Classic line is rated for 1,000 lb, the Contractor for 1,500 lb and the 2000 for 2,000 lb. Two of the listings below say they’re made in the USA.
Bedslide Classic (58″ x 41″), 1,000 lb
At 41″ wide, this is the size to look at if your bed is too narrow for a 48″-wide slide. That’s common on mid-size trucks. Measure between the wheel wells to be sure.
- WEATHERDECK – Our exclusive composite light weight decking is durable in all elements.
- BEDTRAX T-SLOTS – These slots allow you to organize and attach all of your necessities.
- MADE IN THE USA – Our BEDSLIDES are Made In the USA with 100% weather-resistant & heavy duty materials.
Bedslide 1000 Classic (65″ x 48″), 1,000 lb
A 48″-wide, 65″-long slide for full-size short beds. It’s the “default” size many full-size owners start with.
- HEADRAIL: to secure cargo, side Guardrails can be added. MULTIPLE LOCKING POSITIONS for safety & convenience
- WEATHERDECK our exclusive composite light weight decking is durable in all elements
- No-drill, vehicle-specific application for a custom fit
Bedslide Classic 10-7348-CL (73″ x 48″), 1,000 lb
The longer Classic, for beds with more floor length. Check that 73″ leaves room for your tailgate to close.
- 1000lbs Capacity (evenly distributed)
- 75% Extension
- Quickpins: 3-Point Pin install and quick removal
Bedslide Contractor (68″ x 48″), 1,500 lb
The Contractor steps up to a 1,500 lb rating for tool-heavy work trucks.
- WEATHERDECK – Our exclusive composite light weight decking is durable in all elements.
- BEDTRAX T-SLOTS – These slots allow you to organize and attach all of your necessities.
- MADE IN THE USA – Our BEDSLIDES are Made In the USA with 100% weather-resistant & heavy duty materials.
Bedslide 2000 (78″ x 48″), 2,000 lb
The heaviest-rated Bedslide here, and the longest. It’s aimed at long beds and big loads.
- Tough Load: Heavy Duty is the ultimate in heavy-duty cargo management. It holds 2000lbs evenly distributed, with a 78-In…
- Reach Anything: Easily slide the organizer to reach gear with multiple pull-out locking positions for safety. Bedtrax T-…
- Weather Resistant: Weatherdeck composite decking that’s durable in all elements and Made in the USA
Who this is NOT for: short-bed owners. A 78″ slide won’t fit most short beds with the tailgate closed.
CargoGlide Truck Bed Slides
CargoGlide lists its slides by capacity and extension, which makes the trade-off clear. More extension means better reach, and a higher rating means more weight on the tray.
CargoGlide 1500, 75% Extension (63″ x 48″)
Rated for 1,500 lb, with 75% extension. The listing says it’s for full-size short beds.
- CARGOGLIDE 1500 6348 Slide Out Truck Bed Tray (1500 lb Capacity, 75% Extension) compatible with full-size truck bed leng…
- COMPATIBLE WITH DECKED DRAWER SYSTEM: Compatible for mounting on the NEW DECKED Drawer System for midsize truck bed leng…
- QUIT CRAWLING: CargoGlide makes it easy to load and access heavy and oversized cargo in your truck bed, without crawling…
CargoGlide CG1000XL-7041, 100% Extension, 1,000 lb
This one extends fully, so the whole tray clears the tailgate. That’s the choice if you often need things stored at the very front of the tray.
- American Made & Veteran Built
- 1000 lb. capacity
- 100% Extension Slide Out Bed Tray
Budget and Narrow Options
VEVOR Sliding Truck Bed Organizer (65″ x 48″), 1,000 lb
A lower-cost 65″ x 48″ slide, rated for 1,000 lb. The listing mentions 6 movable tie-down rings and a 2-position slide-out.
- High Compatibility: This 65 x 48 in / 1650 x 1220 mm sliding truck bed tray supports up to 1000 lbs/453.6 kg, easily hol…
- Easy Access: With two slide-out positions, accessing deep items is effortless. The truck bed storage drawer’s rail exten…
- Flexible Securing: The sliding truck bed organizer features 6 movable rings around the tray for securing cargo with rope…
MORryde CTG60-2060W Cargo Tray (20″ x 60″, 60% extension)
A narrow 20″-wide tray instead of a full-width slide. It works when you want one sliding lane for a toolbox or cooler and the rest of the bed free.
- Easily acess cargo on sliding tray
- Effortlessly open or close tray on ball-bearing slides
- Quickly unlatch tray with easy-open latch
Accessory: Tie-Downs for Your Slide
Cargo on a slide still needs to be strapped down, because a sudden stop can shift it forward. Bedslide sells a 4-piece D-ring kit for its slides.
- Bedslide Bsa-D-Ringkit4 (4Pc) D-Ring Tie-Down Kit
- Mounting Type: Track Mount
- Attachment Type: D-Ring
A rubber truck bed mat on the tray can also help stop cargo sliding around.
Is a Truck Bed Slide Worth It?
It’s worth it if you load and unload heavy gear often, like contractors, anglers, campers, and anyone who’s tired of crawling into the bed. You’re giving up some bed height and a chunk of the budget. If you mostly haul loose materials like mulch or gravel, a slide gets in the way, and a bed mat or liner makes more sense. More ideas are in our truck accessories guide.
Frequently Asked Questions
How do I know what size truck bed slide I need?
Measure the width between your wheel wells and the bed floor length with the tailgate closed. Pick a slide narrower than the wheel-well gap and shorter than the floor.
What’s the difference between 75% and 100% extension?
A 75% slide rolls out three-quarters of its length, and a 100% slide comes all the way out. Full extension gives better reach to the front of the tray.
Can I use a truck bed slide with a tonneau cover?
Often, yes. But a slide raises the floor, so check that your tallest cargo still fits under the cover when it’s closed.
Does the capacity rating apply when the slide is extended?
Check the listing and instructions. Some makers rate capacity differently when the tray is fully extended, and a loaded tray puts extra leverage on the tailgate end.
Is a bed slide better than a drawer system?
A slide gives you one big flat tray that rolls out. A drawer system gives you lockable drawers with a flat deck on top. Pick a slide for big bulky items, and drawers for organized, secure tool storage.
The Bottom Line
Choose your truck bed slide by measurement first: the wheel-well width, then the bed length, then capacity and extension. A 41″-wide Bedslide Classic suits narrower beds, 48″-wide slides like the Bedslide 1000, CargoGlide 1500 or VEVOR suit most full-size short beds, and the Contractor or Bedslide 2000 handle heavier loads. Check the current price and fit notes on each listing above before you buy.
🛠️ Buying Gear for Your Work Truck?
A free Amazon Business account gets you bulk pricing, tax-exempt purchases, and business-only deals on tools, racks, and truck accessories.
Create Free Amazon Business AccountAs an Amazon Associate we earn from qualifying purchases.
